top of page

Forum Posts

Megha Shetty
Jul 15, 2022
In Questions & Answers
Try to change the router and try. Check if you are connected to the correct network or not. Make KNX IP interface as Static IP ( mac binding ). Check if the KNX IP interface is Online / Active or not.
0
0
7
Megha Shetty
Jul 12, 2022
In Questions & Answers
Check whether you are connected to the proper network or not. Check whether the KNX IP interface is added or not. Restart the Aura controller and KNX IP interface at a time. Check the aura controller and the KNX IP interface is connected to the same network or not.
0
0
7
Megha Shetty
Jul 12, 2022
In Questions & Answers
Resolution: Check if the app is synced properly or not. Check you are connected to the correct network or not. Uninstall the old App and Install the latest app. Remove some devices, add the device again and see if the Device will show-up in the App. Restart the Aura Controller and the Device.
0
0
4
Megha Shetty
Jul 12, 2022
In Questions & Answers
Note : Make sure that you are connected locally, before trying the following steps. Open the Aura App. Navigate to the setting section, using the tabs below. Tap on Connect to Cloud. Login using the credentials. You will be redirect to the page, where you will get the aura controller. Tap on the controller and you will redirect to the Device login. If you are trying to sync for the first time then proceed with the Device login and then click on the sync icon. If you are already completed the Device login, then just tap on the sync icon on the top right, to sync the cloud user. Now you will be successfully synced as a cloud user.
0
0
8
Megha Shetty
Jul 12, 2022
In Questions & Answers
Sign in as a cloud user in the Aura App. Install and sign in to the Alexa App Click on more at the bottom right corner Tap on Skills and Games Search for “Aura Smart” Tap on Aura Smart Click on enable to use Now, you will be redirected to the sign in page Sign in as a aura cloud user Now your aura smart account will be succesfully linked with the Alexa app Click on close now Now you will have to add the device Once you add the device, continue confirming your voice note.
0
0
11
Megha Shetty
Jul 01, 2022
In Questions & Answers
Login to the Aura App. Navigate to the Setting Section using the tabs below. Tap the Add endpoint Section on the top. Under the Add Device section, select CCTV from the options on the screen. Under Device Name, Select the Aura controller, that you will be adding your CCTV to. Proceed to add the necessary details about your CCTV setup. Tap on Continue below to Confirm. You have now succesfully added a CCTV, using a Aura App. Reference :
How to add CCTV to Aura ? content media
0
0
3
Megha Shetty
Jul 01, 2022
In Questions & Answers
Login to the Aura App. Navigate to the Setting Section using the tabs below. Tap the Endpoint Section on Top. Under the Add Device section, select Dynalite from the options on screen. Under Device Name, select the Aura Controller that you will be adding your Dynalite Devices to. Add the IP address of the IP to Dynalite Interface. Proceed to add necessary details about your Dynalite Device, such as Its Type, Name, Floor Number, Room Name and the Channel Number. Tap on Continue below, to Confirm. You have now succesfully added a Dynalite Device, using the Aura App. Reference :
How to add Dynalite Devices to Aura ? content media
0
0
4
Megha Shetty
Jul 01, 2022
In Questions & Answers
Login to the Aura App. Navigate to the Setting Section on the below. Tap on Set Up Device. Skip here to proceed adding the Controller. Make sure that, you are connected to the same network, that the Aura controller is connected. Tap on the Controller to add the Controller to Aura. Now you have succesfully added controller, to the Aura App.
0
0
4
Megha Shetty
Jun 30, 2022
In Questions & Answers
Once you completed your initial controller setup, navigate to the Setting Section, using the tabs below. Tap on connect to Cloud. Tap on Signup on the Welcome page. On the Signup page, fill out your details and setup your login credentials. Agree to the terms of use and tap on signup to confirm. Enter the one time password, you received via your provided email. Tap verify to complete account verification and proceed. You have now succesfully setup Aura account using Aura app. Reference Video :
How to create Aura Account ? content media
0
0
3
Megha Shetty
Jun 30, 2022
In Questions & Answers
Login to the Aura App. Navigate to the Setting Section, using the tabs below. Tap the Manage section, on the top right corner. Under Manage section, select the Device that you want to Delete and tap on the Delete below. Now you are succesfully deleted the device from Aura. Reference video :
How to Delete Devices in Aura ? content media
0
0
3
Megha Shetty
Jun 30, 2022
In Questions & Answers
Login to the Aura App. Navigate to the Setting Section using the tabs below. Tap the endpoint section on the top. Under the add device section, select KNX. Under Device name, select the Aura Device that you will be adding KNX nodes to. Select controller, under the device type. Enter the IP of KNX IP interface. Proceed to add necessary information about your KNX nodes, such as its type, name, floor number, room name and the group address. Tap on continue below, to confirm. You are now succesfully added KNX node to your Aura app. Reference :
How to add KNX Nodes to Aura ? content media
0
0
3
Megha Shetty
Jun 30, 2022
In Questions & Answers
Log in to the Aura App. Navigate to the setting section, using the tabs below. Tap the Manage Section on the top right. Under the Manage section, Select the device that you will be editing. Proceed to make changes to your device. Tap on Save changes below. You are now succesfully edited a device, using the Aura app. Reference :
How to edit the Devices in Aura ? content media
0
0
2
Megha Shetty
Jun 30, 2022
In Questions & Answers
Login to the Aura app. Navigate to the Setting Sections using the tabs below. Select Z-wave or KNX under System Settings. Click on Select Location and Select the Location. Tap on Device and Save the Device. Click on Network Update, to update the Network.
0
0
5
Megha Shetty
Jun 30, 2022
In Questions & Answers
Login to the Aura app. Navigate to the Setting Sections using the tabs below. Select Z-wave or KNX under System Settings. Click on Select Location and Select the Location. Tap on Device and Save the Device. Click on Update Controller, to update the Controller.
0
0
4
Megha Shetty
Jun 30, 2022
In Questions & Answers
Login to the Aura app. Navigate to the setting section using the tab below. Tap the add endpoint section on top. Under the add device section, select Setup Sip. Enter the User Name and Password of the user which you want to Delete. Enter cloud IP. Tap on Delete option to Delete the user.
0
0
3
Megha Shetty
Jun 28, 2022
In Questions & Answers
Login to the Aura app. Navigate to the setting section using the tab below. Tap the add endpoint section on top. Under the add device section, select Setup Sip Click on Register user to register the user. Under SIP Registration, enter the User Name, and Password provided by us. Enter the cloud IP for SIP. Tap on Register to register the user.
0
0
6
Megha Shetty
Jun 28, 2022
In Questions & Answers
Z-WAVE Dynalite KNX TUYA
0
0
3
Megha Shetty
Jun 28, 2022
In Questions & Answers
> All the sensors which follow KNX and Z-WAVE protocol.
0
0
4
Megha Shetty
Jun 24, 2022
In Questions & Answers
Open the Aura app. Navigate to the Scenes section using the tab below. Click on the plus icon on the top right corner. Tap on select to choose the type of scene. Click on location name and choose the location. Select the name of the scene under the scene name. Click on next button to proceed. Tap on the scene name. Choose the floor number under floor section. Select the name of the Room to add the device for the room. Choose the device in the list of available Devices. Proceed with the customization for the selected device. Tap on add to proceed. Repeat the same process to add more devices to the scene. You can proceed adding different devices for the different floor and and room while creating a global scene. Once you complete adding devices click on save to proceed further. Once the scene gets added succesfully, navigate back to the home page Tap on sync icon on the top right section to sync. Now you can see the added global scene in the home tab. Now you are ready with the created scene. You can just tap the scene name to execute the scene. Reference :
How to create Global Scenes content media
0
0
5
Megha Shetty
Jun 24, 2022
In Questions & Answers
Login to the Aura app. Navigate to the Scenes section using the tab below. tap the plus icon on the top right corner. Under the Scene type section, select the type of scene. Select location under the location name. Choose the floor under the Floor section. Under Room, select the name of the Room where you want to execute the scene. Choose the name of the scene under the scene name. Click on next to proceed with adding a device for the scene. Choose the device in the list of available Devices. Choose the device in the list of available Devices. Proceed with the customization for the selected device. Click on add button to add the device to the scene. Repeat the same process to add more devices to the scene. Tap on save so that the scene gets added succesfully. Tap on sync icon on the top right section to sync.back to the home page. Tap on sync icon on the top right section to sync. Now you can see the added local scene in the home tab. You can just tap the scene name to execute the scene. You can just tap the scene name to execute the scene. Reference :
How to create Local Scenes content media
0
0
5
M
Megha Shetty

Megha Shetty

More actions
bottom of page