General Discussion

1. Log in to the Aura app. 2. Navigate to the setting section. 3. Tap the Z-Wave section under system settings. 4. Select the Location location where you will be removing your node. 5. Select the controller where the Z-Wave node is already there. 6. Tap on remove node. 7. Select the node to be remo

1. Login to the Aura app. 2. Navigate to the Scenes section using the tab below. 3. tap the plus icon on the top right corner. 4. Under the Scene type section, select the type of scene. 5. Select location under the location name. 6. Choose the floor under the Floor section. 7. Under Room, select t

> All the sensors which follow KNX and Z-WAVE protocol.

1. Login to the Aura app. 2. Navigate to the setting section using the tab below. 3. Tap the add endpoint section on top. 4. Under the add device section, select Setup Sip 5. Click on Register user to register the user. 6. Under SIP Registration, enter the User Name, and Password provided by us. 7.

1. Login to the Aura app. 2. Navigate to the Setting Sections using the tabs below. 3. Select Z-wave or KNX under System Settings. 4. Click on Select Location and Select the Location. 5. Tap on Device and Save the Device. 6. Click on Update Controller, to update the Controller.

1. Log in to the Aura App. 2. Navigate to the setting section, using the tabs below. 3. Tap the Manage Section on the top right. 4. Under the Manage section, Select the device that you will be editing. 5. Proceed to make changes to your device. 6. Tap on Save changes below. 7. You are now succesful

1. Login to the Aura App. 2. Navigate to the Setting Section, using the tabs below. 3. Tap the Manage section, on the top right corner. 4. Under Manage section, select the Device that you want to Delete and tap on the Delete below. 5. Now you are succesfully deleted the device from Aura. Reference

1. Login to the Aura App. 2. Navigate to the Setting Section on the below. 3. Tap on Set Up Device. 4. Skip here to proceed adding the Controller. 5. Make sure that, you are connected to the same network, that the Aura controller is connected. 6. Tap on the Controller to add the Controller to Aura.

1. Try to change the router and try. 2. Check if you are connected to the correct network or not. 3. Make KNX IP interface as Static IP ( mac binding ). 4. Check if the KNX IP interface is Online / Active or not.

Resolution: 1. Check if the app is synced properly or not. 2. Check you are connected to the correct network or not. 3. Uninstall the old App and Install the latest app. 4. Remove some devices, add the device again and see if the Device will show-up in the App. 5. Restart the Aura Controller and th

1. Open Aura smart application. 2. Click on settings > Add endpoint. 3. Click on Z-wave and select the device. 4. Click on add node. • Case 1 : For Switch/Double switch/Dimmer – Press the button on Z-wave device twice to add the node. • Case 2 : For Touch Panels – Long press on any one endpoint

1. Open the Aura app. 2. Navigate to the Scenes section using the tab below. 3. Click on the plus icon on the top right corner. 4. Tap on select to choose the type of scene. 5. Click on location name and choose the location. 6. Select the name of the scene under the scene name. 7. Click on next bu

1. Z-WAVE 2. Dynalite 3. KNX 4. TUYA

1. Login to the Aura app. 2. Navigate to the setting section using the tab below. 3. Tap the add endpoint section on top. 4. Under the add device section, select Setup Sip. 5. Enter the User Name and Password of the user which you want to Delete. 6. Enter cloud IP. 7. Tap on Delete option to Delete

1. Login to the Aura app. 2. Navigate to the Setting Sections using the tabs below. 3. Select Z-wave or KNX under System Settings. 4. Click on Select Location and Select the Location. 5. Tap on Device and Save the Device. 6. Click on Network Update, to update the Network.

1. Login to the Aura App. 2. Navigate to the Setting Section using the tabs below. 3. Tap the endpoint section on the top. 4. Under the add device section, select KNX. 5. Under Device name, select the Aura Device that you will be adding KNX nodes to. 6. Select controller, under the device type. 7.

1. Once you completed your initial controller setup, navigate to the Setting Section, using the tabs below. 2. Tap on connect to Cloud. 3. Tap on Signup on the Welcome page. 4. On the Signup page, fill out your details and setup your login credentials. 5. Agree to the terms of use and tap on signu

1. Login to the Aura App. 2. Navigate to the Setting Section using the tabs below. 3. Tap the Endpoint Section on Top. 4. Under the Add Device section, select Dynalite from the options on screen. 5. Under Device Name, select the Aura Controller that you will be adding your Dynalite Devices to. 6.

1. Check whether you are connected to the proper network or not. 2. Check whether the KNX IP interface is added or not. 3. Restart the Aura controller and KNX IP interface at a time. 4. Check the aura controller and the KNX IP interface is connected to the same network or not.